CNC | G53 Suppression of Work Offsets (Quick Guide)

In this article, we describe how to use G53 code for suppression of work offsets in CNC machines with all details and examples.

0
214

G53 Introduction

Zero offsets are modal. Command positions programmed after programming zero offsets, are referred to the new origin. In case it is necessary to refer a position command with respect to machine zero, suppressing the programmed zero offsets, then the code G53 is programmed. G53 is block wise active. i.e. it can suppress zero offsets only in the block in which it is programmed.

This is quick guide for G53 Code. You will be able to write CNC Program after read this post but if you want more information or all details, please have a look:
“CNC Milling | G53 Code | Machine Coordinate System”

G53 Code Example

N5 G55 ; Activates the zero offset already loaded in the zero offset memory G55.
N10 G00 X100 Z200 ; Command position is with respect to new origin.
__ :
__ :
__ :
N50 G53 X100 Z200 ; G53 suppresses zero offset G55, and command position is with respect to machine zero.
N55 X100 Z200 ; Command position is once again with respect to G55 zero.

In case of touch probe, G53 is used for automatic tool offset entry in JOG MODE, and automatic updating of already entered tool offsets in AUTOMATIC MODE (by executing a special program, where all command positions are to be defined with respect to machine zero).


Need to More?

Our volunteers have worked together and carefully prepared the articles published here in their native language without using machine translation. You can search the entire site for more information on the subject. You can start a discussion on CNCarea.com forums and join us to get support, ask questions, improve a published article or give your opinion.


Previous articleCNC Lathe | T Command | Tool Change (Quick Guide)
Next articleCNC | What is Zero Offsets and How it Works?