Siemens CNC Lathe | Cycle83 | Peck Drilling Example

0
165

Technical Drawing

Siemens CNC Lathe | Cycle 83 | Peck Drilling Example

CNC Program

PRG1501.MPF
T2 D1 (Guide Drill)
G97 M3 S3000 F0.1
G54 G90
G0 X0 Z3 M8
CYCLE81 ( 5.00000, 0.00000, 3.00000, -3.00000, 0.00000)
G0 X200 Z200 M9
T6 D1 (10mm drilling tool)
G97 M3 S850 F0.1
G90 G54
G0 X0 Z3 M8
CYCLE83 ( 3.00000, 0.00000, 2.00000, -63.00000, 0.00000, -10.00000, 0.00000, 10.00000, 0.00000, 0.00000, 1.00000, 1)
G0 X200 Z200 M9
M30

G Codes Explanation

G00 Rapid traverse
G01 Linear interpolation
G02 and G03 Circular Interpolation
G28 Reference Point Return
G41 and G42 Tool Nose Offset
G54 Work Offset
CYCLE81 Drilling and Centering
CYCLE83 Deep Hole Drilling
G96 Constant Surface Speed
G97 Cancel Constant Surface Speed


Need to More?

Our volunteers have worked together and carefully prepared the articles published here in their native language without using machine translation. You can search the entire site for more information on the subject. You can start a discussion on CNCarea.com forums and join us to get support, ask questions, improve a published article or give your opinion.


Previous articleCNC Lathe | G84 Cycle | Tapping Example
Next articleSiemens CNC Lathe | Cycle93 | Grooving Example