Siemens CNC Lathe | Cycle84 | Tapping Example

0
510

Technical Drawing

Siemens CNC Lathe | Cycle 84 | Tapping Example

CNC Program

O1502.MPF
T2 D1 ( Guide Drill )
G97 M3 S3000 F0.1
G54 G0 X0 Z3 M8
CYCLE81(5.00000, 0.00000, 3.00000, -3.00000, 0.00000)
G0 X200 Z200 M9
T4 D1 ( Drill )
G97 M3 S1700 F0.1
G0 X0 Z3 M8
G54 G90
CYCLE83(3.00000, 0.00000, 2.00000, -30.00000, 0.00000, -10.00000, 0.00000, 10.00000, 0.00000, 0.00000, 1.00000, 1)
G0 X200 Z200 M9
T8 D1 ( M10 Tapping Tool )
G97 M3 S200 F0.1
G0 X0 Z3 M8
G54 G90
CYCLE 84 (3.00000, 0.00000, 2.00000,-24.00000, 0.00000, 0.00000, 3,10.00000,1.50000,0.00000, 200.00000, 200.00000)
G0 X200 Z200 M9
M30

G Codes Explanation

G00 Rapid traverse
G01 Linear interpolation
G02 and G03 Circular Interpolation
G28 Reference Point Return
G41 and G42 Tool Nose Offset
G54 Work Offset
CYCLE81 Drilling and Centering
CYCLE83 Deep Hole Drilling
CYCLE84 Rigid Tapping
G96 Constant Surface Speed
G97 Cancel Constant Surface Speed


Need to More?

Our volunteers have worked together and carefully prepared the articles published here in their native language without using machine translation. You can search the entire site for more information on the subject. You can start a discussion on CNCarea.com forums and join us to get support, ask questions, improve a published article or give your opinion.


Previous articleSiemens CNC Lathe | Cycle85 | Boring ( Ream Holes ) Example
Next articleCNC Lathe | G84 Cycle | Tapping Example