Tag: CNC Lathe
Mitsubishi CNC | M60-M70-M80 Series | Spindle Orientation Parameters
Hakan -
Introduction
In case of encountering orientation problem, the parameters needed to overcome the problem are as follows. Spindle orientation parameters are different depend on controller...
Mitsubishi CNC | M70-M80 Series | M01 Tap Retract Error and Solution
Hakan -
Tap Retract Function Introduction
One standard feature of Mitsubishi M70 and M700 controls is a user-friendly Tap retract feature. After a manual interruption, in case...
Mitsubishi CNC | M60-M70 Series | External Encoder and Linear Scale Cancel
Hakan -
Introduction
External encoders and linear scales are provided by various companies. Certain service / maintenance controls can be done via Mitsubishi CNC unit, but not...
Mitsubishi CNC | M70-M80 Series | Drive System and Axis Removal
Hakan -
Introduction
This article is intended to disable one or more axes on a multi-axis machine with M70/M700/M80/M800 series. The main purpose is to teach how axes...
Siemens CNC | CYCLE802 | Arbitrary Positions
Hakan -
CYCLE802 Introduction
This cycle (CYCLE802) allows you to freely program positions, i.e., rectangular or polar. Individual positions are approached in the order in which you...
CNC | M03-M04-S Command | Spindle Speed
Hakan -
Spindle Speed Introduction
The spindle speed is programmed in revolutions per minute under the address S provided that the machine possesses a controlled spindle. The direction...
Siemens CNC | G70 and G71 Codes | Inch – Metric Conversation
Hakan -
G70 and G71 Codes Introduction
If workpiece dimensions that deviate from the base system settings of the control system are present (inch or mm), the...
CNC Lathe | G50.2 and G51.2 | Polygon Turning
Hakan -
Polygon Turning Introduction
When rotating the workpiece and a tool at a certain ratio, a polygonal figure can be machined. For example, by changing conditions such...
Siemens CNC | RET Code | Subprogram Return Jump
Hakan -
RET Code Introduction
In the Siemens shell cycles for stock removal (as in ISO Dialect), it is necessary after roughing to resume program execution in...
G73 Cycle Examples for CNC Lathe
Hakan -
G73 Pattern Repeating Cycle
The G73 Pattern Repeating Cycle is used for profile repetition on CNC lathes. This cycle is generally used for profile repetition...