Tag: Haas CNC
CNC Milling | T Command | Tool Preparation and Change
T Code Introduction
The tool selection takes place when the T word is programmed. Whether this is a tool change or only a preselection, is...
CNC | M03-M04-S Command | Spindle Speed
Spindle Speed Introduction
The spindle speed is programmed in revolutions per minute under the address S provided that the machine possesses a controlled spindle. The direction...
CNC Milling | G94-G95-F Command | Feedrate
Feedrate Introduction
The feed F is the path velocity and represents the value of the geometric sum of the velocity components of all axes involved....
G02 and G03 Code Examples
G02 and G03 Code
G02 and G03 codes are G codes and used in CNC machines to perform circular interpolation. It is used in CNC...
CNC Milling | Profile Definition Example with Tool Radius Compensation (G41 and G42)
Technical Drawing CNC Program
N5 T2 D2
N10 G0 G90 G42 X0 Y0 Z5 S1000 M3 M41
N20 G94 G1 Z-5 F150
N30 X10.858 F200 ; Start machining the...
CNC Lathe | G50.2 and G51.2 | Polygon Turning
Polygon Turning Introduction
When rotating the workpiece and a tool at a certain ratio, a polygonal figure can be machined. For example, by changing conditions such...
CNC | G98 and G99 Code | Return Point Level
G98 and G99 Codes Introduction
G98 and G99 codes are use with drilling cycles like G81, G83, G84 and etc.. for CNC Milling machines (CNC...
G73 Cycle Examples for CNC Lathe
G73 Pattern Repeating Cycle
The G73 Pattern Repeating Cycle is used for profile repetition on CNC lathes. This cycle is generally used for profile repetition...
CNC | G27 Code | Reference Point Return Check
Introduction
This function checks whether the axes are correctly returned to the reference point at the completion of the part program which is created so...
CNC | M29 Code | Rigid Tapping
M29 Code Introduction
Controlling the spindle motor in the same way as a servo motor in rigid mode enables high-speed tapping. M29 code must be...