Tag: Other CNC Machines
Mitsubishi CNC | M60-M70-M80 Series | Spindle Orientation Parameters
Hakan -
Introduction
In case of encountering orientation problem, the parameters needed to overcome the problem are as follows. Spindle orientation parameters are different depend on controller...
Mitsubishi CNC | M70-M80 Series | M01 Tap Retract Error and Solution
Hakan -
Tap Retract Function Introduction
One standard feature of Mitsubishi M70 and M700 controls is a user-friendly Tap retract feature. After a manual interruption, in case...
Mitsubishi CNC | M60-M70 Series | External Encoder and Linear Scale Cancel
Hakan -
Introduction
External encoders and linear scales are provided by various companies. Certain service / maintenance controls can be done via Mitsubishi CNC unit, but not...
Mitsubishi CNC | M70-M80 Series | Drive System and Axis Removal
Hakan -
Introduction
This article is intended to disable one or more axes on a multi-axis machine with M70/M700/M80/M800 series. The main purpose is to teach how axes...
CNC | M03-M04-S Command | Spindle Speed
Hakan -
Spindle Speed Introduction
The spindle speed is programmed in revolutions per minute under the address S provided that the machine possesses a controlled spindle. The direction...
CNC Grinding | G74 Cycle | Oscillation Direct Constant-Size Grinding
Hakan -
CNC Grinding - Oscillation Size Grinding
This cycle uses only CNC grinding machines with related control units. Not applicable to CNC lathe or machine centres. An...
CNC Grinding | G73 Cycle | Oscillation Grinding
Hakan -
CNC Grinding - Oscillation Grinding
This cycle uses only CNC grinding machines with related control units. Not applicable to CNC lathe or machine centres. An oscillation...
CNC Grinding | G72 Cycle | Traverse Direct Constant-Size Grinding
Hakan -
CNC Grinding - Size Grinding
This cycle uses only CNC grinding machines with related control units. Not applicable to CNC lathe or machine centres. A traverse...
CNC Grinding | G71 Cycle | Traverse Grinding
Hakan -
CNC Grinding - Traverse Grinding
This cycle uses only CNC grinding machines with related control units. Not applicable to CNC lathe or machine centres. A traverse...
CNC | M198 Code | External Subprogram Call (Quick Guide)
Hakan -
M198 Code Introduction
During memory operation, you can call and execute a subprogram registered in an external device (such as a Memory Card, Handy File,...